POJECT · GEAR

Hardware safety

Climbing- and vehicle-rated hardware in a five-link load path. Check every link before you load it.

Load path5 linksCarabiner25 kN
Folder 01

Safety Protocols

The load path & rated hardware

  • A handful of items in this rig aren't just gym accessories — they're the same class of hardware used in mountain-climbing protection and heavy-vehicle tie-down: forged, gate-locking carabiners and high-tensile webbing straps built to industrial breaking-strength standards.

Here's how they're actually rigged into the setup, and the checks that keep that load path safe.

  1. 1

    Structural Anchor

    The rig's welded steel crossbar, or a non-marking soft-loop strap choked directly around it.

  2. 2

    Tie-Down Strap

    VEHICLEX / THEFITGUY webbing extends the anchor point out to a forged steel D-ring terminal.

  3. 3

    Locking Carabiner

    A JRSGS 25kN gate-lock clip closes the chain — gate faced away from the pull, locked shut.

  4. 4

    Band / Handle

    The working resistance — tubing, a grip handle, a rope attachment — clips in last, closest to the load.

  5. 5

    You

    The working end of the chain — only ever as strong as the weakest link rigged in behind it.

Climbing & Vehicle-Rated Hardware

  • JRSGS Rock Locking Clips

    25 kN · 2 VARIANTS

    Purpose: Gate-lock clips close the connection between strap, band and handle.

    Usage: Check the gate and load orientation before every set.

    Design & specifications

    Asymmetric matte-black D-shaped frames with screw-lock barrels. Variant A has a metallic-red barrel; Variant B has a matte-black barrel. The manifest lists 25 kN.

    Climbing-Grade Rating
  • VEHICLEX Axle Tie-Down Straps

    Sleeved webbing

    Purpose: Sleeved webbing brings an anchor point to a D-ring terminal.

    Usage: Use the documented anchor arrangement and inspect the webbing.

    Design & specifications

    Thick black webbing with gold/silver triangular steel D-rings and sliding protective sleeves. A red rectangular patch with white VEHICLEX lettering identifies the sleeve.

    Vehicle-Rated Webbing
  • THEFITGUY Ultimate Extension Straps

    Dual D-ring straps

    Purpose: D-ring straps extend the working attachment point.

    Usage: Use to position the handle or band for the recorded setup.

    Design & specifications

    Flat black nylon extension straps with silver steel D-rings at both ends. Bright red zigzag and box reinforcement runs along their faces; the black fabric tag reads thefitguy.

    Aircraft-Grade Webbing
  • NILIGHT Soft Loop Anchor Straps

    1.7 × 17 IN

    Purpose: Webbing loops create a non-marking connection around the structural anchor.

    Usage: Use at the recorded anchor point and inspect the loop before loading.

    Design & specifications

    Short black polyester choke-loop straps with repeating white X/diamond reinforcement. The small white/black/red warning tag carries the Nilight emblem.

    Non-Marking Anchor
  • XSTRAP Motorcycle Soft Loop Tie-Downs

    Soft Loop

    Purpose: A second webbing-loop option provides non-marking anchor contact.

    Usage: Use only in the documented setup; inspect the webbing and connections.

    Design & specifications

    Woven soft-loop straps built for securing a motorcycle in transit — a second non-marking anchor option alongside the Nilight set.

    Vehicle-Rated Webbing

Advantages

  • Every anchor point breaks down and reconfigures in seconds — nothing bolted or permanently mounted.
  • Soft-loop and tie-down straps don't mark or wear the structural steel the way a bare hook or band would.
  • Locking gates prevent the accidental unclipping a plain resistance-band loop is prone to mid-set.
  • Rated in kN / lbs, so the hardware's actual failure point sits well above anything the bands can pull.

Safety Measures

  • Match hardware rating to the heaviest band in the line with real margin — never eyeball it as "strong enough."
  • Carabiner gate faces away from the direction of pull, fully closed and locked, checked before every set.
  • Webbing inspected before use — any cut, fraying, or UV-bleaching gets that strap retired immediately, no exceptions.
  • No daisy-chaining mismatched hardware — every link in the setup should carry its own independent rating.
  • Carabiners loaded along the spine only — side- or gate-loading drops rated strength dramatically.
  • No shock-loading — bands are let out under control, never snapped or dropped into a sudden stop.

Anchor, tie-down strap, locking carabiner, band or handle, then you: only as strong as the weakest link.

Folder 02

The system behind the hardware

Training mechanics

Band resistance changes with extension.Supported setups and symptom response matter.

Clinical notes

Mechanism
Repeatable supported loading and controlled ranges.
Stack interaction
Spine, nerve, shoulder and elbow constraints govern exercise selection before ambition.
Margin
Manufacturer ratings are not a guarantee for a home rig; inspect the entire anchor-to-user chain.
Monitor
Record setup, range, pain response and changes in hand strength.
Stop rule
Progressive weakness, new numbness or bowel/bladder changes stop the session and require assessment.
Go deeper

Full detail in FIT PROTOCOL

POJECT / DOCUMENT LIBRARY

Books & manuals