FIT PROTOCOL · CURRENT RECORD

Gear & bands

The hex-grid bundles, the locks they protect and the documented equipment manifest — rated hardware, grips, anchors and recovery tools.

Folder 01

Hex-grid bundles

Main site: Resistance bands
  • Six current named bundles, with two matched Enforcer sets.
  • Band counts vary by bundle; nominal label sums do not measure force or guarantee a safe amount of stretch.
Hex-grid bundles

The six bundles

BundleNominal labelComposition — countMy use
Juggernaut255 lb nominal3 × 85 lb-labelled bandsRecorded pressing bundle; exercise selection and load are trainer-managed.
Titan300 lb nominal4 × 75 lb-labelled bandsRecorded four-band bundle; labels do not establish force at the hands.
Enforcer130 lb / set nominal2 matched sets of 2 × 65 lb-labelled bandsTwo matched sets, two 65-labelled bands in each set.
Tricep Specialist165 lb nominal3 × 55 lb-labelled bands + THEFITGUY ropeThree 55-labelled bands with THEFITGUY rope.
Viper180 lb nominal4 × 45 lb-labelled bandsRecorded four-band bundle; progression is trainer-managed.
Scalpel140 lb nominal4 × 35 lb-labelled bandsRecorded four-band bundle; progression is trainer-managed.
  • The current bundle directory records equipment identities.
  • Counts differ by bundle; labels and hardware appearance do not establish measured force, a resistance curve or a working-load rating.

Hardware locks I never negotiate

  • Spine sparing (L4-S1): rack pulls locked above patellar height; braced belt work unloads spinal erectors by 20-40%; chest-supported rows eliminate axial load entirely.
  • Ulnar decompression: neutral-grip handles keep the left ulnar nerve from snapping over the medial epicondyle under heavy elbow flexion.
  • Post-cholecystectomy pacing: smaller fat portions and meal enzymes — digestion is part of the training plan, not an afterthought.
  • 10:30 band deload: on State A mornings, a 100-rep band deload sits between the session and reload — blood flow and joint-friendly volume without turning recovery into a second workout.

Focus of each bundle

BundleNominal labelFocusTypical work
Juggernaut255 lb nominalChestRecorded pressing bundle; exercise selection and load are trainer-managed.
Titan300 lb nominalBackRecorded four-band bundle; labels do not establish force at the hands.
Enforcer130 lb / set nominalMatched setsTwo matched sets, two 65-labelled bands in each set.
Tricep Specialist165 lb nominalTricepsThree 55-labelled bands with THEFITGUY rope.
Viper180 lb nominalReserve / drop setsRecorded four-band bundle; progression is trainer-managed.
Scalpel140 lb nominalDelts / isolationRecorded four-band bundle; progression is trainer-managed.

Further study: Training evidence & interpreting the recorded plan →

Hex-grid bundles

KUZARO band grades

The supplied manifest lists six tubing grades from light gray to solid black. 4 KUZARO kits are owned, with a listed set total of 360 lb.

GradeWeightColour
35 lb15.9 kgLight gray
45 lb20.4 kgMedium-light gray
55 lb24.9 kgMedium gray
65 lb29.5 kgDark gray
75 lb34.0 kgVery dark gray / soft black
85 lb38.5 kgSolid black

How the bundles are finished

  • Joints. Black Renfrew cloth tape at the joint loops, replacing rigid plastic ties.
  • Connection. Connections vary by setup. Historical connector counts are not working-load ratings; use the trainer-confirmed configuration.
  • The current directory supersedes the older three-band and Twin Cobras snapshot.
  • Labels identify the bundles; actual resistance depends on setup and stretch.
  • Older photographs and printed artwork remain dated visual records.

Gear database · KUZARO manifest · Main site: Resistance bands ↗

Further study: Training evidence & interpreting the recorded plan →

Folder 02

Movement classes and locks

FIT: Training mechanics

Supported strength first, spectacle last — and hardware locks I never negotiate.

Movement classes and locks

Movement classes

MovementHow I do itWhy it fits me
Supported horizontal pullChest-supported rowHigh tolerance, minimal spinal shear
Supported pressMachine / dumbbell press with back supportShoulder tolerance sets grip and range
Hinge and squat patternReduced-range, supported, symptom-guidedProgression only while locks stay quiet
Isolation and correctiveElbow-and shoulder-friendly workBlood flow and control without axial cost

Further study: Training evidence & interpreting the recorded plan →

Movement classes and locks

Hardware locks I never negotiate

  • Spine sparing (L4-S1): rack pulls locked above patellar height; braced belt work unloads spinal erectors by 20-40%; chest-supported rows eliminate axial load entirely.
  • Ulnar decompression: neutral-grip handles keep the left ulnar nerve from snapping over the medial epicondyle under heavy elbow flexion.
  • Post-cholecystectomy pacing: smaller fat portions and meal enzymes — digestion is part of the training plan, not an afterthought.
  • 10:30 band deload: on State A mornings, a 100-rep band deload sits between the session and reload — blood flow and joint-friendly volume without turning recovery into a second workout.

Further study: Training evidence & interpreting the recorded plan →

Movement classes and locks

Training, five lenses

Lens 1 — Physiology.

  • At 46, muscle protein synthesis responds less to the same leucine dose (anabolic resistance) while tendon collagen synthesis lags further behind; the training answer is not more load but better-distributed load: supported variations (chest-supported rows, supported presses) keep mechanical tension on muscle while removing axial spinal cost at L4-S1, so the tissue that adapts slowest sets the progression rate.

Lens 2 — Measurement.

  • Progression is judged across weeks of logged, repeatable sessions — not single heroic efforts.
  • The 10:30 band deload (100 reps) is itself a measurement: joint-friendly blood-flow volume that tells me whether the locks stayed quiet after the main session.

Lens 3 — Training.

  • Use the current six-bundle directory above.
  • Band counts vary; trainer-managed resistance, working range and progression replace the retired level schema.
  • A label sum is not measured hand force or a hardware working-load rating.

Lens 4 — Nutrition interface.

  • Training windows are fed on schedule (V2 intra-session, V4 reload with 19 g carbohydrate) so that load decisions are never confounded by under-fueling; the post-cholecystectomy pacing rule (smaller fat portions, meal enzymes) is part of the training plan, not an afterthought.

Lens 5 — Safety. Hardware locks are non-negotiable: rack pulls above patellar height, neutral grips for the left ulnar nerve, braced belt work unloading erectors 20-40%.

Pain is data about setup. Progressive weakness, new numbness, or bowel/bladder change stops the session — that rule outranks any program.

Further study: Training evidence & interpreting the recorded plan →

Folder 03

Equipment manifest

Main site: Gear folders

Nineteen documented items in six groups — from KUZARO bands to a nested foam roller.

Equipment manifest

Resistance bands

Purpose: Portable band resistance across pushing, pulling and isolation movements.

Usage: Choose the documented bundle or band configuration for the movement.

ItemSpecWhat it is
KUZARO · Multi-band setup4 KITS · 360 LB SETYellow connection webbing with black KUZARO lettering and thick black D-rings. The supplied manifest lists six tubing grades from light gray to solid black.
HPYGN Heavy-Duty Compression System330 LB SETGray-black multi-layered bands with black nylon shrouds and carabiner clips. Owner-confirmed short-band configuration: two 65 lb bands per side, paired twice (four bands total), shortened at the low Iron Tower anchor and routed into the Tribe bar’s rotating eyelets. Nominal ratings total 130 lb per side and 260 lb combined; resistance changes with stretch.

Gear database · Main site: Resistance bands ↗

Further study: Training evidence & interpreting the recorded plan →

Equipment manifest

Grips & handles

Purpose: Attachment choices provide comfortable hand positions for different movements.

Usage: Match the grip, rope or handle to the recorded exercise and comfortable range.

ItemSpecWhat it is
BLUSLM Ergonomic Tricep RopeHand Rope-03Extra-long twin black braided nylon arms, a chrome connection collar and large molded black palm-flare stops.
HXD-ERGO Biomechanical HandlesCurvedAsymmetric black ergonomic grip molds, flat nylon straps with a blue-and-white shield logo, and integrated fixed black carabiners.
INNSTAR High-Traction Stirrup HandlesHoneycombTriangular black nylon stirrup handles with black carabiners. The ABS grip cores have anti-slip silicone honeycomb texture; white INNSTAR lettering runs along the straps.
Angles90 Camo Pull-Up GripsA90Bright orange curved handles on flat black nylon slings, with black A90 GRIPS lettering along the outer curve.
THEFITGUY Single-Arm Tricep Rope16.5 INSingle-arm black braided rope with a zinc-plated top snap hook. The distinctive red bell-shaped palm stop carries debossed thefitguy lettering.
MANUEKLEAR Neoprene Multi-Grip Handles3 GRIP ZONESExtra-wide matte-gray neoprene/nylon straps with one silver D-ring. Sewn upper, middle and lower grip pockets provide three positions; the side tag has a yellow-and-white logo.

Gear database · Main site: Grips & handles ↗

Further study: Training evidence & interpreting the recorded plan →

Equipment manifest

Bars & structure

Purpose: Bars, extensions and the sled kit position the working attachment for each setup.

Usage: Use the documented configuration and inspect each connection before loading.

ItemSpecWhat it is
Tribe Lifting Modular Resistance Bar3 PIECES · 360° SWIVELSPolished chrome knurled bar with three threaded sections and independent rotating ball-bearing swivel rings at both ends.
HPYGN Heavy Pilates Structural BarFoam-padded steelBlack steel bar covered in dense non-slip black foam. Its nylon terminal straps have distinctive red edge stitching.
THEFITGUY Ultimate Extension StrapsDual D-ring strapsFlat black nylon extension straps with silver steel D-rings at both ends. Bright red zigzag and box reinforcement runs along their faces; the black fabric tag reads thefitguy.
THEFITGUY Sled Pulling Belt & Straps Kit2 × 9.8 FT · 4 HOOKSWide padded black neoprene waist harness with two steel D-rings, two 9.8-foot pulling straps and four silver oval snap hooks. Red diamond and X stitching identifies the belt and straps.

Gear database · Main site: Bars & structure ↗

Further study: Training evidence & interpreting the recorded plan →

Equipment manifest

Connections

Purpose: Locking connectors and sleeves organize the working load path.

Usage: Keep gates closed and locked; inspect and align the hardware before every set.

ItemSpecWhat it is
Oak-Sports Heavy-Duty Carabiners25 kN · 5,600 LBBright silver symmetrical oval steel frames with black textured screw-lock gates. The equipment manifest lists a 25 kN / 5,600 lb rating.
JRSGS Rock Locking Clips25 kN · 2 VARIANTSAsymmetric matte-black D-shaped frames with screw-lock barrels. Variant A has a metallic-red barrel; Variant B has a matte-black barrel. The manifest lists 25 kN.
Neoprene Cable / Bundle Management Sleeves1.5 INFlexible black wraps enclosing multi-band arrays. The reversible split-seam sleeves use a continuous hook-and-loop closure for bundle management and contact shielding.

Gear database · Main site: Connections ↗

Further study: Training evidence & interpreting the recorded plan →

Equipment manifest

Anchors

Purpose: Soft-loop and sleeved webbing provide adaptable, non-marking anchor contact.

Usage: Use the documented structural anchor and inspect the webbing before loading.

ItemSpecWhat it is
VEHICLEX Axle Tie-Down StrapsSleeved webbingThick black webbing with gold/silver triangular steel D-rings and sliding protective sleeves. A red rectangular patch with white VEHICLEX lettering identifies the sleeve.
NILIGHT Soft Loop Anchor Straps1.7 × 17 INShort black polyester choke-loop straps with repeating white X/diamond reinforcement. The small white/black/red warning tag carries the Nilight emblem.

Gear database · Main site: Anchors ↗

Further study: Training evidence & interpreting the recorded plan →

Equipment manifest

Logistics & recovery

Purpose: Organized transport and different rolling surfaces support a repeatable session routine.

Usage: Store hardware in the duffel; choose a comfortable tool and pressure for rolling.

ItemSpecWhat it is
MIAOKE Tactical Hardware DuffelDuffel + organizerBlack utility duffel/backpack with red zipper tracks and red diamond elastic side cording. The matching clear-panel organizer is labeled WASHBAG.
jooeer 3-in-1 Nested Foam Roller Set3 NESTED TIERSOuter 18 × 5.5 in black high-density foam roller with a pyramid/spiked texture.Middle 18 × 3.9 in neon-orange roller with linear ridges.Core 18 × 1.57 in orange segmented massage stick with matte-gray grips and a black lanyard.

Gear database · Main site: Logistics & recovery ↗

Further study: Training evidence & interpreting the recorded plan →

Folder 04

Load path and hardware safety

Main site: Hardware safety

Match the hardware rating to the heaviest band with real margin.Ratings are a floor to stay well under, not a target to push toward.

Load path and hardware safety

The five-link load path

  1. Structural anchor. The rig’s welded steel crossbar, or a non-marking soft-loop strap choked directly around it.
  2. Tie-down strap. VEHICLEX or THEFITGUY webbing extends the anchor point out to a forged steel D-ring terminal.
  3. Locking carabiner. A JRSGS 25 kN gate-lock clip closes the chain — gate faced away from the pull, locked shut.
  4. Band or handle. The working resistance — tubing, a grip handle, a rope attachment — clips in last, closest to the load.
  5. You. The working end of the chain — only ever as strong as the weakest link rigged in behind it.

From the main site · Hardware safety ↗

Further study: Training evidence & interpreting the recorded plan →

Load path and hardware safety

Advantages and safety measures

Advantages

  • Every anchor point breaks down and reconfigures in seconds — nothing bolted or permanently mounted.
  • Soft-loop and tie-down straps do not mark or wear the structural steel the way a bare hook or band would.
  • Locking gates prevent the accidental unclipping a plain resistance-band loop is prone to mid-set.
  • Rated in kN and lb, so the hardware’s failure point sits well above anything the bands can pull.

Safety measures

  • Match hardware rating to the heaviest band in the line with real margin — never eyeball it as “strong enough.”
  • Carabiner gate faces away from the direction of pull, fully closed and locked, checked before every set.
  • Inspect webbing before use — any cut, fraying or UV-bleaching retires that strap immediately.
  • No daisy-chaining mismatched hardware — every link carries its own independent rating.
  • Load carabiners along the spine only — side- or gate-loading drops rated strength dramatically.
  • No shock-loading — bands are let out under control, never snapped or dropped into a sudden stop.

Ratings reflect the manufacturer specs printed on the hardware itself. This is a home-gym rig, not a certified climbing or industrial rigging system.

From the main site · Hardware safety ↗

Further study: Training evidence & interpreting the recorded plan →

Current manuals

Terms explained: vectors, day states and DMZ

Gym Equipment

POJECT / DOCUMENT LIBRARY

Books & manuals